Home > Amana > Router Bits > Cove > Cove Bits w/Bearings >

[AMANA 49121] COVE BIT 7/8 RAD 1/2 SHANK
Amana 49121 COVE BIT 7/8 RAD 1/2 SHANK
 
Your Price: $142.32


Availability: Usually ships out on the same or next business day
Product Code: AMANA-49121
Qty:

  
Product Info
 

Description

    The covetto form – produced by the cove bit – is one of the classic building blocks for many molding profiles. Use it alone or in combination with beads and fillets. Use the cove to detail the edges of casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables, the other half is the corner-round.

    For best results with a large radius cutter, make a preliminary cut with a smaller radius bit or chamfer the workpiece to reduce the amount of stock to be removed in the finish pass. This will produce a smoother finish and prolong tool life. The largest diameter bits must be run at reduced speed. Use in a handheld or table-mounted router.

    Maximum RPM 12,000.

    Not guaranteed due to extreme diameter & radius. For best results, it is recommended to use a smaller radius bit or chamfer the material prior to using these large radius tools. Tool life will be prolonged and a smoother finish will result.

    Use in a table-mounted router. Not for use in a handheld router!

Contents

    (1) Amana 49121

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Amana > Router Bits > Cove > Cove Bits w/Bearings
-->